 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Name: | CuNi30 NC035 W 2.0890 Copper Nickel Alloy High Precision Alloy Strip Rod Wire | Material Type: | CuNi30Mn(W 2.0890 NC035) |
|---|---|---|---|
| Supply State: | Rod /Wire /Strip | Resistivity: | 0.35(at 20℃ (Ωmm2/m)) |
| Temperature Factor Of Resistivity（20℃~600℃）X10-5/℃:: | <10 | EMF Vs Cu(μV/℃ )(0~100℃ ):: | -37 |
| Melting Point(℃): | 1170 | Max Working Temperature: | 350℃ |
| High Light: | NC035 Copper Based Alloys,CuNi30 Copper Based Alloys,Resistance Heating Copper Nickel Strip |
||
CuNi30 NC035 W 2.0890 Copper Nickel Alloy High Precision Alloy Strip Rod Wire
OhmAlloy035 (Resistance heating wire and resistance wire)
(Common Name:CuNi30,NC35.Cu70Ni30)
OhmAlloy035 is a copper-nickel alloy (Cu70Ni30 alloy) with low resistivity for use at temperatures up to 350°C.
OhmAlloy035 is kind of low resistance heating alloy.It is one of the key materials of the low-voltage electrical products. It is widely used in low-voltage circuit breaker, electric blankets. Thermal overload relay, and other low-voltage electrical product.
OhmAlloy035 is typically used for low-temperature applications such as heating cables.
The addition of nickel to pure copper can significantly improve the strength, corrosion resistance, hardness, electrical resistance and thermoelectricity, and reduce the temperature coefficient of resistivity. Therefore, compared with other copper alloys, the mechanical and physical properties of cupronickel are extremely good, with good ductility, high hardness, beautiful color, corrosion resistance and deep drawing performance.
It is widely used as corrosion-resistant structural parts in shipbuilding, petroleum, chemical, construction, electric power, precision instruments, medical equipment, musical instruments and other departments. Some cupronickel has special electrical properties, which can be used to make resistance elements, thermocouple materials and compensation wires. Non-industrial cupronickel is mainly used to make decorative crafts.
Normal Composition%
|
Nickel |
30 |
Manganese |
0.5 |
|
Copper |
Bal. |
|
|
Typical Mechanical Properties(1.0mm)
|
Yield strength |
Tensile Strength |
Elongation |
|
Mpa |
Mpa |
% |
|
200 |
400 |
25 |
Typical Physical Properties
|
Density (g/cm3) |
8.9 |
|
Electrical resistivity at 20℃ (Ωmm2/m) |
0.35 |
|
Temperature factor of resistivity(20℃~600℃)X10-5/℃ |
<10 |
|
Conductivity coefficient at 20℃ (WmK) |
27 |
|
EMF vs Cu(μV/℃ )(0~100℃ ) |
-37 |
| Coefficient of thermal expansion | |
| Temperature | Thermal Expansion x10-6/K |
| 20 ℃- 400℃ | 17 |
| Specific heat capacity | |
| Temperature | 20℃ |
| J/gK | 0.390 |
| Melting point (℃) | 1170 |
| Max continuous operating temperature in air (℃) | 350 |
| Magnetic properties | non-magnetic |
Corrosion resistance performance
| Alloys | Working In atmosphere at 20℃ | Working at max temperature 200℃ | |||||
|
Air and oxygen contain gases |
gases with Nitrogen |
gases with sulfur oxidability |
gases with sulfur reductibility |
carburization | |||
| OhmAlloy035 | good | good | good | good | bad | good | |
Style of supply
| Alloys Name | Type | Dimension | ||
| OhmAlloy035W | Wire | D=0.06mm~8mm | ||
| OhmAlloy035R | Ribbon | W=0.4~40 | T=0.05~2.9mm | |
| OhmAlloy035S | Strip | W=8~200mm | T=0.1~3.0 | |
| OhmAlloy035F | Foil | W=6~120mm | T=0.005~0.1 | |
| OhmAlloy035B | Bar | Dia=8~100mm | L=50~1000 | |
Contact Person: Mr. Qiu
Tel: +8613795230939
