Payment & Shipping Terms:
|Package:||15kg/spool||Application:||Casting, Aerospace Engine|
|Spraying Way:||Arc Spraying||Typical Hardness:||HRB 50-60|
|Bond Strength:||5000 Psi||Deposit Efficiency:||70%|
45Ct 1.6mm Thermal Spray Wire Arc Spray For Casting , Pumper Tube
NiCr20 is a high purity nickel chrome wire specifically designed for arc spraying. It produces dense, well-bonded coatings with excellent machineability, electrical conductivity, and high temperature oxidation resistance up to 1800 degrees F (980 degrees C). It is widely used for machine element repair, electrical and high temperature corrosion applications.
TYPICAL DEPOSIT CHARACTERISTICS:
Þ Typical Hardness: HRB 90
Þ Bond Strength: 7300 psi
Þ Deposit Rate: 11 lbs/hr/100A
Þ Deposit Efficiency 70%
Þ Wire Coverage: 0.8 oz/ft2 / mil
Þ Surface Texture * Variable
Þ Machinability Good
* Depends on air pressure used
Surface should be clean, white metal, with no oxides (rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning.
Recommended method of preparation is to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe.
Þ Oxidation and heat resistant coating applicationsx
NOMINAL CHEMICAL COMPOSITION (wt%)
RECOMMENDED SPRAY PARAMETERS:
|1/16” (1.6mm)||*50-60 psi||*28-30||*100-200||*4-8 in (10-20 cm)|
* Parameters are typical and may vary depending on equipment used. Contact your equipment manufacturer for optimum spray parameters
STANDARD SIZES & PACKAGING:
Contact Person: Mr. Qiu