|
Product Details:
Payment & Shipping Terms:
|
Density (g/cm3): | 8.9 | Electrical Resistivity At 20℃ (Ωmm2/m): | 0.05 |
---|---|---|---|
Temperature Factor Of Resistivity(20℃~600℃)X10-5/℃: | <120 | Conductivity Coefficient At 20℃ (WmK): | 130 |
EMF Vs Cu(μV/℃ )(0~100℃ ): | -12 | Melting Point (℃): | 109 |
High Light: | co ni alloy,copper nickel alloy |
Common Name: (CuNi2,NC5)
OhmAlloy 005 is a copper-nickel alloy (Cu2Ni98 alloy) with low resistivity for use at temperatures up to 200°C.
Cuprothal 5 is typically used for low-temperature applications such as heating cables in electric blankets and pillows.
Nickel | 2 | Manganese | - |
Copper | Bal. |
Yield strength | Tensile Strength | Elongation |
Mpa | Mpa | % |
90 | 220 | 25 |
Density (g/cm3) | 8.9 |
Electrical resistivity at 20℃ (Ωmm2/m) | 0.05 |
Temperature factor of resistivity(20℃~600℃)X10-5/℃ | <120 |
Conductivity coefficient at 20℃ (WmK) | 130 |
EMF vs Cu(μV/℃ )(0~100℃ ) | -12 |
Coefficient of thermal expansion | |
Temperature | Thermal Expansion x10-6/K |
20 ℃- 400℃ | 17.5 |
Specific heat capacity | |
Temperature | 20℃ |
J/gK | 0.380 |
Melting point (℃) | 109 |
Max continuous operating temperature in air (℃) | 200 |
Magnetic properties | non-magnetic |
Alloys | Working In atmosphere at 20℃ | Working at max temperature 200℃ | |||||
Air and oxygen contain gases |
gases with Nitrogen |
gases with sulfur oxidability |
gases with sulfur reductibility |
carburization | |||
OhmAlloy005 | good | bad | bad | bad | bad | good |
Alloys Name | Type | Dimension | ||
OhmAlloy005W | Wire | D=0.06mm~8mm | ||
OhmAlloy005R | Ribbon | W=0.4~40 | T=0.05~2.9mm | |
OhmAlloy005S | Strip | W=8~200mm | T=0.1~3.0 | |
OhmAlloy005F | Foil | W=6~120mm | T=0.005~0.1 | |
OhmAlloy005B | Bar | Dia=8~100mm | L=50~1000 |
Contact Person: Mr. Qiu
Tel: +8613795230939