 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Conductor: | +Chromel, -Alumel | Conductor Dia: | SWG27 |
|---|---|---|---|
| Surface: | Bright & Oxidize | Package: | 5kgs/spool, 10kgs/spool, 20kgs/spool |
| Standard: | ANSI96.1 Or IEC 584-2 | ||
| High Light: | thermocouple bare wire,thermocouple extension wire |
||
SWG 27 0.417mm precise size Type K Bare Wire For Thermocouple & Sensors
Classification for thermocouple Type K Wire
Thermocouple variety and index for thermocouple Type K wire
| Thermocouple Variety and Index | ||
| Variety | Type | Measurement Range(°C) |
| NiCr-NiSi | K | –200–1300 |
| NiCr-CuNi | E | –200–900 |
| Fe-CuNi | J | –40–750 |
| Cu-CuNi | T | –200–350 |
| NiCrSi-NiSi | N | –200–1300 |
| NiCr-AuFe0.07 | NiCr-AuFe0.07 | –270–0 |
Thermocouple type and grade for thermocouple Type K wire
| Thermocouple Type | Grade | Temperature Range(°C) | Allowable Deviation |
| type K and type N | I | –40–1100 | ±1.5°C or±0.4%t |
| II | –40–1300 | ±2.5°C or ±0.75%t | |
| III | –200–40 | ±2.5°C or ±1.5%t | |
| type E | I | –40–1100 | ±1.5°C or ±0.4%t |
| II | –40–1300 | ±2.5°C or ±0.75%t | |
| III | –200–40 | ±2.5°C or±1.5%t | |
| type J | I | –40–750 | ±1.5°C or ±0.4%t |
| II | –40–750 | ±2.5°C or ±0.75%t | |
| type T | I | –40–350 | ±0.5°C or± 0.4%t |
| II | –40–350 | ±1.0°C or± 0.75%t | |
| III | –200–40 | ±1.0°C or± 1.5%t | |
| NiCr-AuFe0.07 | I | –270–0 | ±0.5°C |
| II | ±1.0°C |
Specification of alloy wires for thermocouple TYPE K ROD
| Anode | Cathode | Diameter(mm) | Maximum Temperature(°C) | |||
| name | code | name | code | long-time using | short-time using | |
| NiCr10(Chromel) | KP | NiSi3(Alumel) | KN | Φ0.3 | 700 | 800 |
| Φ0.5 | 800 | 900 | ||||
| Φ0.8 Φ1.0 | 900 | 1000 | ||||
| Φ1.2 Φ1.6 | 1000 | 1100 | ||||
| Φ2.0 Φ2.5 | 1100 | 1200 | ||||
| NiCr14.2Si | NP | NiSi4 | NN | Φ3.2 | 1200 | 1300 |
| NiCr10(Chromel) | EP | CuNi45(Copel) | EN | Φ0.3 Φ0.5 | 350 | 450 |
| Φ0.8 Φ1.0 Φ1.2 | 450 | 550 | ||||
| Φ1.6 Φ2.0 | 550 | 650 | ||||
| Φ2.5 | 650 | 750 | ||||
| Φ3.2 | 750 | 900 | ||||
| Fe(Iron) | JP | CuNi45(Copel) | JN | Φ0.3 Φ0.5 | 300 | 400 |
| Φ0.8 Φ1.0 Φ1.2 | 400 | 500 | ||||
| Φ1.6 Φ2.0 | 500 | 600 | ||||
| Φ2.5 Φ3.2 | 600 | 750 | ||||
| Cu(Copper) | TP | CuNi45(Copel) | TN | Φ0.2 Φ0.3 | 150 | 200 |
| Φ0.5 Φ0.8 | 200 | 250 | ||||
| Φ1.0 Φ1.2 | 250 | 300 | ||||
| Φ1.6 Φ2.0 | 300 | 350 |
||||
Specification:
TYPE K (CHROMEL vs ALUMEL ) is used in oxidizing, inert or dry reducing atmospheres. Exposure to vacuum limited to short time periods. Must be protected from sulfurous and marginally oxidizing atmospheres. Reliable and accurate at high temperatures.
1. Chemical Composition
| Material | Chemical composition (%) | ||||
| Ni | Cr | Si | Mn | Al | |
| KP(Chromel) | 90 | 10 | |||
| KN(Alumel) | 95 | 1-2 | 0.5-1.5 | 1-1.5 | |
2. Physical properties and Mechnical properties
|
Material |
Density(g/cm3) |
Melting point(℃) |
Tensile Strength(Mpa) |
Volume resistivity(μΩ.cm) |
Elongation rate (%) |
| KP(Chromel) | 8.5 | 1427 | >490 | 70.6(20℃) | >10 |
| KN(Alumel) | 8.6 | 1399 | >390 | 29.4(20℃) | >15 |
3. EMF Value range at different temperature
| Material | EMF value Vs Pt(μV) | |||||
| 100℃ | 200℃ | 300℃ | 400℃ | 500℃ | 600℃ | |
| KP(Chromel) | 2816~2896 | 5938~6018 | 9298~9378 | 12729~12821 | 16156~16266 | 19532~19676 |
| KN(Alumel) | 1218~1262 | 2140~2180 | 2849~2893 | 3600~3644 | 4403~4463 | 5271~5331 |
| EMF value Vs Pt(μV) | ||||
| 700℃ | 800℃ | 900℃ | 1000℃ | 1100℃ |
| 22845~22999 | 26064~26246 | 29223~29411 | 32313~32525 | 35336~35548 |
| 6167~6247 | 7080~7160 | 7959~8059 | 8807~8907 | 9617~9737 |
Applications:
Product & Package:
Contact Person: Jully
Tel: +8617301602658
